Noise From AUX-Input

Noise from AUX-input

Fault-tracing information

Note! This applies to vehicles up until structure week 200639, from and incl. structure week 200640 twisted cable is used in production.

If the AUX-input is selected as source, there may be a clicking or scraping sound. This may occur when there is at least 50% audio power and no media player is connected or between two sound tracks.
A shielded signal cable runs from the AUX-input to Integrated Audio Module (IAM).
Change to twisted cable.
AUX service cable AUX Service Cable

Was a fault detected?

Yes - Fault Found

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Fault-tracing information

-------------------------------------------------