Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P034100

Condition




The camshaft is divided into a number of segments (flanks). The camshaft houses a gearwheel with a number of teeth (the teeth are positioned between each segment) that are read by the engine control module (ECM) via the camshaft position sensor. The diagnostic trouble code is generated if the control module detects too few segments for 2 crankshaft revolutions (one camshaft revolution).
The diagnostic trouble code can be diagnosed by the control module when the engine is running and engine speed exceeds a certain value.
The diagnostic trouble code (DTC) corresponds to intake camshaft position (CMP) sensor, bank 1.

Substitute value
- Engine speed sensor signal.

Possible source
- Intermittent fault in the cable harness or connectors.
- Camshaft sensor fitted incorrectly.
- Damaged mass air flow sensor.

Fault symptom[s]
- Nothing.