Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P007100

Condition




The engine control module (ECM) checks the signal from the outside temperature sensor in the left door mirror. The diagnostic trouble code is generated if the control module registers that the value from the outside temperature sensor deviates too much from the value of the intake temperature after the engine has cooled at least 8 hours since running at operating temperature.
The diagnostic trouble code can be diagnosed at ignition on after the engine temperature has dropped by at least 55 °C from fully warm engine (higher than 70 °C).

Substitute value
- The value is set to the constant 20 °C.

Possible source
- Contact resistance in connector.
- Damaged outside temperature sensor.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.