Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-C002313

Condition
The central electronic module (CEM) powers the brake lamps.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Open-circuit in the power supply cable.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated stop lamp.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Open-circuit in the power supply cable.

Fault symptom[s]
- Stop (brake) lamp does not light when the brake pedal is depressed
- Message in display