Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DIM-B118412

Condition
The Driver information module (DIM) controls the relay that supplies voltage to the Start control module (SCU).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Short-circuit to supply voltage in the signal cable.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cable.

Fault symptom[s]
- Steering column lock does not lock\unlock
- Engine fails to start