Fault-Tracing

Fault-tracing TCM-0096

Checking the function of the gear-shift position sensor




- Ignition on
- Read Geartronic status by clicking on the symbol for VCT2000.
- Depress the brake pedal. Move the gear selector lever to "MAN" (manual) and check that the status changes.
- Move the gear selector lever to +. Check that gear selection is updated in the display in the diagnostic tool as well as the display in the combined instrument panel.
- Move the gear selector lever to -. Check that the gear selection is updated.
If the gear selector lever position is not updated, replace the gear selector module (GSM).

Other information
- Printed circuit board gear selector assembly/top panel, replacing Printed Circuit Board Gear Selector Assembly/Top Panel, Replacing









Is the function OK?

Yes - DONE

No - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the components, reconnect the connectors etc.
- Ignition on
- Depress the brake pedal. Move the gear selector lever to "MAN" (manual).
- Move the gear selector lever to +. Check that gear selection is updated in the display in the combined instrument panel.
- Move the gear selector lever to -. Check that the gear selection is updated.









Is the function OK?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Fault-tracing information

VERIFIED - Fault Found

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Checking the function of the gear-shift position sensor

-------------------------------------------------