FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2007 >> S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Description and Operation >> Transmission Control Module (TCM) >> TF-80SC >> System Overview

System Overview






System overview

General




TF-80SC (TF-80SC AWD) is 6-speed electronically controlled automatic transmission with lock-up function on the five highest gears. The Transmission Control Module (TCM) adapts gearshifts so that the correct gear is always selected with respect to driving style, engine load, driver requirements, speed etc. This provides good fuel economy and increased comfort through gentler gearshifts and lower noise level.
The Transmission Control Module (TCM) receives information on required gear position and required driving style (driving program) from the driver. Together with signals from a number of sensors in the transmission and the engine management system, this enables the calculation of optimum gearshift timing and lock-up engagement, in contrast to a gearbox with only a hydraulic control system. The control module takes consideration of small changes in operating conditions and adapts the different transmission functions so that the correct gear is always selected in accordance with the driving program selected by the driver.
The Transmission Control Module (TCM) has an adaptive capacity intended to ensure even gearshift quality during the whole service life of the transmission.
In order to be able to determine gearshift timing and lock-up engagement precisely, based on the selected driving program, the control module receives information on the following:
- Selected gear position - from the gear position indicator.
- Speed of transmission input shaft - from transmission speed sensor, input shaft.
- Speed of transmission output shaft - from transmission speed sensor, output shaft.
- Transmission oil temperature - from temperature sensor in the transmission.
- Engine speed and torque, and throttle opening - from Engine Control Module (ECM) via the Controller Area Network (CAN).
- Whether and how much the accelerator pedal is depressed - from Engine Control Module (ECM) via the Controller Area Network (CAN).
- Engine temperature - from Engine Control Module (ECM) via the Controller Area Network (CAN).
- Vehicle speed - from Brake Control Module (BCM) via the Controller Area Network (CAN).
- Whether and how much the brake pedal is depressed - from Brake Control Module (BCM) via the Controller Area Network (CAN).

Components

Location Of Components:





The following components are included in the automatic transmission control system:
- Transmission Control Module (TCM) - Controls activation/deactivation of the solenoids by means of processing the input signals from the transmission speed and temperature sensors. Also stores adaptive data and diagnostic trouble codes (DTC) and frozen values for diagnostics.
- Gear position indicator, integrated with Transmission Control Module (TCM) (4) - Provides Transmission Control Module (TCM) information on selected gear position.
- Solenoid S1 - Controls engine braking on 1st gear.
- Solenoid S2 - Controls engine braking on 1st gear.
- Lock-up solenoid - Controls the lock-up function and also used with certain shiftings.
- Linear pressure solenoid SLT - Controls transmission system pressure.
- Linear pressure solenoid SLC1 - Controls transmission shift pressure and also used with certain shiftings.
- Linear pressure solenoid SLC2 - Controls transmission shift pressure and also used with certain shiftings.
- Linear pressure solenoid SLC3 - Controls transmission shift pressure and also used with certain shiftings.
- Linear pressure solenoid SLB1 - Controls transmission shift pressure and also used with certain shiftings.
- Speed sensor, input shaft (1) - Provides Transmission Control Module (TCM) information on input shaft speed from the engine.
- Speed sensor, output shaft (2) - Provides Transmission Control Module (TCM) information on output shaft speed from the transmission.
- Oil temperature sensor (3) - Provides Transmission Control Module (TCM) information on transmission oil temperature.
- Gear Selector Module (GSM) - Provides Transmission Control Module (TCM) information on Geartronic position and winter mode (W) etc.

Signals
The table below summarizes the input and output signals to and from the Transmission Control Module (TCM). The signal types are divided into directly connected signals, serial communication and Controller Area Network (CAN) communication. The illustration below displays the same information with the Volvo component designations.














pro multis Credits:Operation CHARM About Operation CHARM