Tire Monitoring System: Service and Repair

TIRE PRESSURE MONITORING SYSTEM (TPMS)
The easiest way to reset a warning is to stop the vehicle, top up the tire with low air pressure with air and then drive the vehicle faster than 40 km/h (25 mph) for longer than 10 minutes, accumulated time. If the customer has arrived at the workshop the warning can also be reset by filling the tire with low air pressure with air and the sensor is then activated using the special tool for activating the tire pressure sensor.

NOTE: Only applies to USA/CDN. A warning lamp also lights in the Driver information module (DIM) at the same time as the warning message.