Collision Protection Unit From Behind Front Seat

Collision protection unit from behind front seat

Operation number: 85244-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Only applies to vehicles equipped with fixed backrest.
Remove front seat. Refer to: Front seat Front Seat.





Caution! The operation has to be performed on both sides of the seat.





Note! On both sides.





Note! On both sides.

Torque: Backrest cushion to seat cushion , 45 Nm.

Loosen and fold aside the backrest cushion's upholstery Refer to: Front seat backrest Front Seat Backrest.





Warning! Be extra careful when handling the compressed spring.




Torque: Fitting bolt, hinge, 18 Nm.
Torque: Hinge bracket to backrest, 9 Nm.





























Only applies to vehicles equipped with foldable backrest.
Remove front seat Refer to: Front seat Front Seat





Caution! The operation has to be performed on both sides of the seat.





Note! On both sides.





Note! On both sides.

Torque: Backrest cushion to seat cushion , 45 Nm.

Loosen and fold aside the backrest cushion's upholstery Refer to: Front seat backrest Front Seat Backrest.





Warning! Be extra careful when handling the compressed spring.




Torque: Fitting bolt, hinge, 18 Nm.





























Installation

To install, reverse the removal procedure