Turn Signal Switch: Service and Repair

Control stalk, left

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Removing the steering column covers
Remove the steering column covers. See: Panel steering column Panel Steering Column.

Removal

Removing the turn signal lamp switch




Remove the turn signal lamp switch together with the 2 screws (2)

Caution! The pins on the turn signal switch are fragile. Carefully pull straight out.

Installation

Installing the turn signal lamp switch

Caution! The pins on the turn signal switch are fragile. Carefully press the turn signal switches in the connectors. Check that the pins enter correctly in the connectors.

Install the turn signal lamp switch using the 2 screws. Tighten.

Installing the steering column covers
Install the steering column covers. See: Panel steering column Panel Steering Column.