Headlamp Switch: Service and Repair

Lighting switch

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Ignition off.

Removal

Removing the switch




Turn the switch to position 0.
Remove the end cover for the dashboard.
Press the switch out from behind.

Remove:
- the connector
- the switch.

Removing bulbs
Twist counter-clockwise using a small screwdriver. Remove the holder and bulb.

Installation

Installing the bulb and switch

Install:
- the bulb
- the connector
- the switch.
- the end cover.

Finishing

Function test
Test the function.