Trunk / Liftgate Position Sensor: Service and Repair

Luggage Compartment Cover Position Switch

NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the sill cover





Remove the sill cover in the luggage compartment by lifting it straight up. Concealed clips, 6 pcs., and guides, 2 pcs.

Loosen the connectors for the sill cover.

Removing the switch





Remove the switch for the luggage by pressing in the catches.

Installation

Installing the switch

Install:
- the switch
- the connectors.

Installing the sill cover
Install the sill cover.

Finishing

Function test
Test the function.