Door Control Modules

Downloading software and replacing the control module
New software can be downloaded into the passenger door module (PDM) and the driver door module (DDM). When ordering software, the hardware and the software in the car is compared to the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.
If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the software is downloaded.
The window positions must be initialized again after replacing the control module. This is so that the new control module stores the closed position of the window. Initialization is carried out using the diagnostic tool.
If the car has power seats with memory for the door mirrors (only S40/V50 2004 and C70), this function can be switched off. This means that the personal settings for the door mirrors, based on the remote control used to unlock the door, can be deactivated. Deactivation is carried out using the diagnostic tool. These customer parameters are stored in the control module but not in the Volvo central database. This means that the deactivation must be repeated when hardware is replaced.
For further information regarding downloading, see Design and Function, Downloading Software.