Subwoofer Module (SUB)

Subwoofer module (SUB)

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Ignition off.
Fold out the left side panel in the cargo compartment. See: Side panel loadspace Side Panel Loadspace.

Removal

Removing connectors





Remove:
- The 4 x M6 screws
- the connectors.

Installation

Installing connectors

Note! For tightening torques, see Specifications. [1][2]Body and Frame.

Note! Check that there is no dirt in the optical connectors.

Install in the reverse order.

Finishing

Note! After replacing the subwoofer module (SUB), new software must be ordered and the module programmed.

Programming the control module
Program the subwoofer module (SUB). See: 30775440.