Driver Door Module (DDM)

Driver door module (DDM)

Operation number: 36444-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Preparatory work

Information

Caution! New software can only be ordered when the new control module is installed in the vehicle. The new control module identity is read off by VIDA with ordering, which is required for ordering the correct software. Always check that the control module and control module box connectors do not have bent or damaged terminals or sockets. This may have been the cause of the fault.

Ignition off




Ignition off

Removal

Removing the driver door module (DDM)

Caution! Driver door module (DDM) and the electric motor may not be parted.




Remove the control module and electric motor according to: Electric motor, lift mechanism, front door Service and Repair.

Installation

Installing the driver door module (DDM)

Caution! Check that the control module connectors are intact.

Fit the control module and electric motor according to: Electric motor, lift mechanism, front door Service and Repair.

Finishing

Ordering software
Order software for the control module. See: 30739648.

Initializing the window position
Initiate the window's position, see: VIDA Vehicle communication.