Removal and Replacement

Convertible Roof Module (CRM)

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Ignition off.

Removing the right-hand side panel
Fold out the right-hand side panel in the cargo compartment. See: Side panel loadspace Side Panel Loadspace

Removal

Removing the bracket





Remove:
- the connectors
- the 4 nuts
Angle out the bracket.

Removing the control module





Remove:
- the 2 screws
- the control module.

Installation

Installing the control module

Note! For tightening torques, see Specifications. [1][2]Specifications.

Install:
- the control module
- the 2 screws
- the bracket
- the 4 x nuts

Programming the Convertible Roof Module (CRM)

Programming
Program the Convertible Roof Module (CRM). See: 30765098.

Calibrating CRM according to: Diagnostics/Car communication/CRM/Advanced/Calibrating position sensor

Finishing

Function test
Test the function.