Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-009B

Condition




The supplemental restraint system module (SRS) checks messages regarding the rear seat belt buckles on the CAN network between the supplemental restraint system module (SRS) and the central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module registers a configuration fault for longer than 2.5 seconds.
The diagnostic trouble code (DTC) can only be diagnosed when the ignition is switched on (12 V). In other words, the diagnostic trouble code (DTC) can only be diagnosed when the ignition is switched from position 0 to positions I, II or III.

Substitute value
- None.

Possible source
- If the supplemental restraint system module (SRS) receives a message from the central electronic module (CEM) indicating that the rear seat belt buckles are connected to the central electronic module (CEM), despite the supplemental restraint system module (SRS) being programmed that the rear seat belt buckles are not connected to the central electronic module (CEM).

Fault symptom[s]
- The information lamp is lit
- SRS warning message displayed.