Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-0001

Condition
The supplemental restraint system module (SRS) checks the signal from the driver information module (DIM) on the CAN network.
The diagnostic trouble code (DTC) is stored if the control module receives a CAN message indicating that the LED in the driver information module (DIM) is damaged.
The diagnostic trouble code (DTC) can be diagnosed in ignition positions I, II or III.

Substitute value
- None.

Possible source
- Damaged LED in the driver information module (DIM).

Fault symptom[s]
- The SRS indicator lamp does not light when the ignition is switched on
- General warning lamp lit
- SRS warning message displayed.