Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-0003

Condition




For any type of key communication to occur, i.e. unlocking, locking, passive start or activating and deactivating the key, the keyless vehicle module (KVM) carries out a communication check using remote keyless entry (RKE).
The diagnostic trouble code (DTC) is stored if the checks of the connections result in faulty communication with the receiver or the receiver does not respond.
The diagnostic trouble code (DTC) can always be diagnosed when the car is supplied with power.

Substitute value
- None.

Possible source
- Faulty communication with remote keyless entry (RKE)
- No response from remote keyless entry (RKE).

Fault symptom[s]
- Cannot be controlled with the remote control.