Internal Fault

Internal fault

Initiation
Initialize the position of the rear window. See Initializing the window position in VIDA vehicle communication.

Select Continue

Continue - Verification

-------------------------------------------------

Verification




Verification power window mechanism

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the power window mechanisms can be operated.

Does the control for the power window mechanism operate?

Yes - Troubleshooting procedure complete

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Initiation

-------------------------------------------------