Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CRM-3011

Condition




To prevent the roof sections colliding when operating the roof, the position sensors must be calibrated.
The convertible roof module (CRM) senses if an initial calibration of the position sensors has been carried out.
Calibration must be carried out in both the open and closed position. The diagnostic trouble code detects that calibration in the open position has not been performed.
The diagnostic trouble code (DTC) can be diagnosed in ignition positions 0, I, II and III.

Substitute value
- None.

Possible source
- Calibration not performed.

Fault symptom[s]
- None or limited roof manoeuvreing