Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CRM-2022

Condition




The diagnostic trouble code (DTC) is generated when the signal cable between the position sensor and Convertible Roof Module (CRM) is short-circuited to ground.
The diagnostic trouble code (DTC) can be diagnosed in ignition positions 0, I, II and III.

Substitute value
- None.

Possible source
- Short-circuit to ground in the cable.
- Open-circuit in the signal cable to the front / rear position sensor.
- Position sensor not working.
- Incorrect installation of position sensor.

Fault symptom[s]
- None or limited roof manoeuvreing