Collision Signal received

Collision signal received

Replacing the component
The combustion preheater module (CPM) has registered that a component in the SRS system has been activated. The heater cannot be activated until the diagnostic trouble code (DTC) has been erased.





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Exit Fault-Tracing

------------------------

Attempt New Test - Replacing the component

FAULT FOUND - DONE

-------------------------------------------------