Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8A35

Condition




The central electronic module (CEM) communicates with the left-hand gas discharge lamp module (GDL).
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) receives information from the left-hand gas discharge lamp module (GDL), which registers that the control module is installed on the right-hand side.
The diagnostic trouble code (DTC) is stored when a new gas discharge lamp module (GDL) is installed on the left-hand side.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Left-hand gas discharge lamp module (GDL) is installed on the right-hand side
- New gas discharge lamp module (GDL) installed on the left-hand side.

Fault symptom[s]
- Low beam does not work
- Low beam intermittent function.