Driveshaft Left

Driveshaft left






Removal

Note! Removal steps in this procedure may contain installation details.

Warning! Do not use magnets or magnetic tools close to tooth wheels, drive shafts or wheel hubs. A magnetized tooth wheel will lose its function and generate incorrect signals resulting in fault codes.

Note! Any magnetized tooth wheel, drive shaft or wheel hub must be replaced with a new component.

Remove the wheel Refer to: Wheels Service and Repair

Loosen wheel spindle Refer to: Front control arm Front Control Arm




Torque: Driveshaft to wheel hub (front) Stage 1: 35 Nm Stage 2: 90 degree




951 2923 Hydraulic hole cylinder 951 2923 Hydraulic Hole Cylinder 999 7251 Press tool 999 7251 Press Tool













Warning! Be prepared to collect escaping fluid.

999 7162 Claw 999 7162 Claw

Installation

To install, reverse the removal procedure.