Procedures

Bottle holder























INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.






Bottle holder





- Carefully pry off the bottom of the panel at the rear edge of the center console. Pull the panel backwards/downwards.





- Unplug the connector from the 12V socket.





- Remove the 12V socket by prying out the two tabs in the holder and pulling it out. Place the panel to one side.





- Press the 12V socket into the new panel.





- Connect the connector to the 12V socket.





- Install the new panel by first hooking on the upper edge and then by pressing the bottom in.