Towbar, Detachable [1 of 4]
Towbar, detachable
INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
Towbar, detachable
Preparations
- Pull off the seat cushion, first at the rear edge where it is secured by one holder. Then at the front edge where it is secured by two holders.
- Remove the seat cushion.
- Fold the central arm rest forward.
- Remove the central arm rest by grasping each end and pulling upwards until it releases at the rear edge from the backrest's lugs (1).
- Then pull forwards until the holders (2) on the sides of the backrest have slid out of the corresponding cut-out (3) in the central arm rest.
- Fold the backrest forward.
- Remove the panel for the backrest's right-hand mounting.
- Fold the backrest away from the right-hand mounting.
- Pull it out from the mounting at the arm rest and remove it.
- Pull off the rubber molding at the rear edge of the left-hand door opening.
- Remove the right-hand B pillar panel by prying it off at the sides at the lower edge using a weatherstrip tool. It is secured by three clips on the inside.
- Remove the screw from the right-hand side panel.
- Carefully pull the panel from the body side and unhook it from the sill panel at the front edge. It is secured by eleven clips on the inside.
- Remove the tailgate's sill panel by pulling it up until the four clips on the upper side and the eight catches at the lower edge release.
- Lift out the spare wheel, jack and other parts from the storage compartment in the cargo floor support.