Lateral Link, Replacing

Lateral link, replacing

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparation
Remove the wheel.
Install tensioner999 5659 Tension caliper 999 5659 Tension Caliper. See Tensioner 999 5659, User instructions User Instructions. Set the rear suspension to the normal position.

Removing the lateral link





Remove:
- both the screws for the lateral link
- the lateral link.

Tightening torque
For tightening torques, see Specifications [1][2]Specifications.

Installing the lateral link
Install the lateral link. Use new screws.
Tighten the screws (M12).

Finishing
Lower and remove the tensioner. See Tensioner 999 5659, User instructions User Instructions.