Bushing Rear Lateral Link, Replacing

Bushing rear lateral link, replacing

Special tools:
999 7054 Adapter incl. 2x MC6C M6X12 999 7054 Adapter Incl. 2x MC6C M6X12
999 7032 Sleeve 999 7032 Sleeve
999 7134 Conical socket 999 7134 Conical Socket
999 7146 Socket 999 7146 Socket
999 7145 Nut 999 7145 Nut
999 7150 Drift 999 7150 Drift
999 7147 Nut 999 7147 Nut

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the rear wheels.

Disconnecting the lateral link
Remove the rear mounting for the lateral link. See Lateral link, replacing Lateral Link, Replacing.
Fold the lateral link down.

Removal

Removing the bushing





Note! Note the position of the bushing.

Install the hydraulic cylinder as illustrated.
Use999 7054 Adapter incl. 2x MC6C M6X12 999 7054 Adapter Incl. 2x MC6C M6X12 with999 7032 Sleeve 999 7032 Sleeve and connecting rod (M12X400)999 7034 Connecting rod M12X400 999 7034 Connecting Rod M12X400 , socket:999 7146 Socket 999 7146 Socket and999 7145 Nut 999 7145 Nut.
Pull the bushing out

Installation

Installing the bushing




Install the bushing according to the previous markings.
Install the hydraulic cylinder as illustrated.
Use999 7150 Drift 999 7150 Drift with999 7147 Nut 999 7147 Nut.
Press in the new bushing.

Installing the lateral link




Fold the lateral link up.
Install the front mounting for the lateral link. See Lateral link, replacing Lateral Link, Replacing.

Finishing

Install the wheels. See: Installing wheels Service and Repair.