Crankshaft Main Bearing

Crankshaft Main Bearing Fasteners
Please also refer to Crank Mechanism, Assembling for additional information. Crank Mechanism, Assembling





Note! Use new M10 bolts.

Caution! The M8-bolts on the exhaust side have two lengths.

Tighten the screws in sequence from the center and outwards.

First pass: M10 20 Nm
Second pass: M10 45 Nm
Third pass: M8 24 Nm
Fourth pass: M7 17 Nm
Final pass: M10 90°

Crankshaft Axial Play maximum 0.25 mm