Downloading Software

Downloading software

Hint: The fault may be due to incorrect or damaged software in the transmission control module (TCM). The fault can be remedied by downloading new software.

Cancel fault-tracing.
Download the latest software into the transmission control module (TCM). Then resume the fault tracing. See the "Technical journal" for information about the most recent software.





Continue - Verification

-------------------------------------------------

Verification





Checking automatic transmission

Note! After carrying out the repair check that the symptom has been remedied. Check the automatic transmission as follows:

- Test drive the car to test the function of the automatic transmission. See Initial Inspection and Diagnostic Overview
- If hydraulic hoses, gaskets or other components have been replaced, check that there is no oil leakage after the test drive.





Is the automatic transmission OK?

Yes - Troubleshooting procedure complete

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Downloading software

-------------------------------------------------