Upholstery Backrest Cushion (Third Row), Replacing

Upholstery backrest cushion (third row), replacing

As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparations
Fold down the backrest.
Fold the cargo compartment floor up.

Removing the backrest cushion upholstery (third row)




Remove the 2 screws.




Fold the backrest up.

Remove:
- backrest. Pull upwards and outwards.




- the side piece at the head restraint
- the side piece at the side of the backrest.




Remove the upholstery from the back panel. The upholstery is secured at 13 mounting points.





Remove:
- the upholstery/foam from the seat frame
- the upholstery from the foam.

Installing the backrest cushion upholstery (third row)

Note! For tightening torques, see Specifications [1][2]Body and Frame.

Install:
- the upholstery on the foam
- the upholstery/foam on the backrest frame.
Hook the upholstery onto the back panel.
Install the back by securing and pressing downwards.
Fold down the backrest.
Install the 2 M6 screws. Tighten
Fold the backrest up.

Install:
- the side piece at the head restraint
- the side piece at the side of the backrest.