Console: Adjustments

Cool box/center console, adjusting

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Note! When replacing the center console on vehicles with a cool box/armrest, a cut-out must be made in the rear section of the center console.

Adjusting the center console with cool box





Remove:
- the 3 screws on top (1)
- the 2 screws on the side (2). Detach the plate. (3).




Saw off the marked area.









Seen from the right-hand side.




Seen from the left-hand side.

Installation

Installing the center tunnel console




Smooth off the sawn edges.

Install:
- the metal brackets
- the 3 screws on the top. Tighten
- the center tunnel console. See: Center console, replacing Service and Repair