Internal Fault

Internal fault

Checking the component
Diagnostic trouble code (DTC) ICM-1D03 indicates that the software download has failed. This may be because the software for an infotainment control module (ICM) with alphanumeric display has been downloaded into a module with a graphic display or vice-versa.
Check the software and display/control module by clicking on the VCT2000 symbol. Is the correct software installed for the display that is installed?

- If not, try programming the display/control module with the correct software. See8691181
- If the display/control module and software are correct, try reloading the same software using8691181.





Continue - Programming the control module

-------------------------------------------------

Programming the control module
Programming can be carried out when the software has been delivered.
Program the control module. See8691181.

Continue - FAULT FOUND

-------------------------------------------------