Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-2F02

Condition




The central electronic module (CEM) checks the signal from the driver's seat position sensor.
The diagnostic trouble code (DTC) is stored if the control module registers that the signal in the signal cable is too low.
The diagnostic trouble code (DTC) can be diagnosed in ignition positions I, II or III.

Substitute value
- None.

Possible source
- Short-circuit to ground in the signal cable or in the connectors between the central electronic module (CEM) and the driver's seat position sensor.

Fault symptom[s]
- The information lamp is lit
- SRS warning message displayed.