Parking Assist Control Module: Service and Repair

Parking assistance module (PAM), replacing

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Ignition off.
Fold down the lower hatch in the cargo compartment.

Removal

Removing the parking assistance module (PAM)





Remove:
- the control module from the Velcro strip mounting
- the 2 connectors.

Installation

Installing the parking assistance module (PAM)

Install:
- the 2 connectors
- the control module in the Velcro mounting.

Note! Check that the control module is secure.

Install the cover in the side panel.

Finishing

Function test
Test the function.