Screen/Circuit Board, Replacing

Entertainment equipment

Screen/circuit board, replacing

NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing screen/circuit board







Remove the screen's frame.

HINT: Begin on the side of the frame, for easier removal


CAUTION: Prevent the risk of static electricity by touching a grounded object.







Carefully lift up the screen from the head restraint.

Remove the connector.







Remove the 2 screws.







Carefully lift up the circuit board.


Installation







NOTE: Check that there are two 6 mm x 50 mm (0.25 in x 2 in) pieces of foam tape as illustrated.

Installing circuit board

Install:

- the connector
- the circuit board
- the bolts, x2

Installing the screen

NOTE: Always use a new frame when installing the screen.

Install:
- the connector
- the screen
- the frame for the screen