Checking the Sun Roof Sunshade

Checking the sun roof sunshade

Checking the sunshade
Check that the sunshade rail is clean. Clean the rail as necessary.
Check that the sunshade guide runs in the rail. If necessary, reinsert the guide in the rail.
Replace the sunshade guide as necessary.
Remedy as necessary:

Other information
- For sunshade guide replacement: Sun visor/inner cover sun roof, replacing Service and Repair





Select Continue once the fault has been remedied.

Continue - Functionality check

-------------------------------------------------

Functionality check
Check that the sun roof sunshade can be operated.

Is the sunshade function OK?

Yes - Fault Found

No - Trouble-shooting information

-------------------------------------------------

Trouble-shooting information




Information

Fault-tracing information
The fault should be diagnosed and remedied. Since this is not the case the fault-tracing process has failed.
Complete the fault-tracing for those fault or try again.

Do you want to terminate fault-tracing at this time?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Checking the sunshade

-------------------------------------------------