Support Leg For Child Seats

Support Leg For Child Seats










INTRODUCTION

NOTE: Read through the whole installation instruction before starting the work.

Support leg for child seats
The support leg is used for child seats on the rear seat







- Screw the support leg into the frame of the child sea. Use the screws from the kit. Tighten the screws thoroughly.







- Adjust the angle of the child seat by unscrewing the knob 1) completely. Adjust the length of the support leg. Screw in the knob. Tighten the knob.

The child must be sitting comfortably. A child is safest sitting upright in the car. Children unable to sit on their own must be in a semireclined position.