Checking Wiring and Connectors (Gear Selector Module (GSM))

Checking wiring and connectors (gear selector module (GSM))

Checking wiring and connectors (gear selector module (GSM))
- Ignition off
- Detach the panel on the gear selector assembly top panel.
Check the connectors for the gear selector module (GSM). Check for damaged pins. Check the wiring between the gear selector module (GSM) and the transmission control module (TCM). Check for damage, open-circuits and short-circuits.

Other information:
- To check or replace the printed circuit board (standard), see Printed circuit board gear selector assembly / top panel, replacing Printed Circuit Board Gear Selector Assembly/Top Panel, Replacing
- To check or replace the printed circuit board (Geartronic), see Printed circuit board gear selector assembly / top panel Geartronic, replacing Printed Circuit Board Gear Selector Assembly/Top Panel Geartronic, Replacing.

Continue - DONE

-------------------------------------------------