Checking the Power Retractable Door Mirrors

Checking the power retractable door mirrors

Checking unsynchronized door mirrors




If a door mirror folds inwards at the same time as the other folds outwards when the button for folding the mirrors is activated, the mirrors are unsynchronized.
Remedy unsynchronized door mirrors according to the following instructions.
- Ignition off
- Disconnect the fuse for the power door mirror and then reinstall the fuse
- Ignition on
- Press the button for deploying and retracting the power retractable door mirrors.

Other information:
- For further information about the fuses and relays, see the Wiring Diagram.

Continue - Symptom verification

-------------------------------------------------

Symptom verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Test both the door mirrors to their limit positions using the controls. The mirrors should move in the corresponding direction.
After repairing power folding door mirrors:
Check whether the power door mirrors are synchronized by pressing the button for retraction and deployment of the mirrors.

Are the controls working?

Yes - Verification complete

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking unsynchronized door mirrors

-------------------------------------------------