Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information REM-8D13

Condition
The rear electronic module (REM) powers the stop lamps (LED) directly via an output.
The diagnostic trouble code (DTC) is stored if the rear electronic module (REM) registers that the signal at the output is too low.
The diagnostic trouble code (DTC) can be diagnosed at key position II.

Substitute value
- None.

Possible source
- Short-circuit to ground in the signal cable
- Stop lamp (LED) defective.

Fault symptom[s]
- The stop lamp does not light when the brake pedal is depressed.