Focusing Fault. Permanent Fault

Focusing fault. Permanent fault

Checking CD changer and disc
Check that there is no condensation on the disc.
Check that the disc is correctly inserted.
Try a new disc.
Replace the CD changer if the CD changer does not function.
Remedy as necessary.
If no fault is found replace the head unit/audio module.

Caution! New head unit/audio control modules are supplied without software. The head unit/audio control module must be programmed after it has been replaced.

Other information:
- For information about programming and replacing the head unit/audio control module, see Radio cassette player, replacing Radio Cassette Player, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall connectors, components etc.
- Ignition on.
Check that CD changer functions.

Does the CD changer function?

Yes - Verification completed

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking CD changer and disc

-------------------------------------------------