Trunk Lamp Switch: Service and Repair

Replacing the switch for the lock unit / cargo compartment lighting

Removal

Lock unit
The switch for the cargo compartment lighting is positioned in the lock unit.




- Remove the upholstery on the tailgate. This is to gain access to the entire lock unit mechanism
- Unhook the lever from the lock cylinder mechanism
- Remove the screws (3 x) from the lock unit. Remove the lock unit
- Disconnect the connector.

Installation

Lock unit

Install:
1. the connector,
2. the three screws for the lock unit. Tighten the screws to 10 Nm,
3. the lever for the lock mechanism,
4. the upholstery.