Programming and Relearning

Programming the remote control setting

Programming the remote control setting
Cars equipped with seats and door mirrors with memory automatically set the memorized positions for seats and mirrors, depending on which remote control unlocks the car.
It is possible to deactivate the memory for seat and memory for door mirror functions. If the function is deactivated, the seat position or door mirror position is not reset when the car is unlocked with the remote control. Follow the instructions below to change the setting for how seat and door mirrors should work when using the remote control.




- Ignition on
- Press the VCT2000 symbol and read off the setting.
Change the setting by marking the desired alternative and programming. Check that the read off value is changed to the desired alternative

-------------------------------------------------