Description Of Parameters

Description Of Parameters

The following parameters can be read off:

- The status of the front left window up-control
- The status of the front left window down-control
- The status of the front left window auto-control
- The status of the front right window up-control
- The status of the front right window down-control
- The status of the front right window auto-control
- The status of the rear left window up-control
- The status of the rear left window down-control
- The status of the rear right window up-control
- The status of the rear right window down-control
- The status of the child safety button

NOTE: A diagnostic trouble code (DTC) is stored if the child safety button is activated for 10 seconds.

- The status for the selection of the control for the left door mirror
- The status for the selection of the control for the right door mirror
- The status of the upward control for the door mirror
- The status of the downward control for the door mirror
- The status of the control for the left door mirror
- The status of the control for the right door mirror
- The status of the up-motor for the power window
- The status of the down-motor for the power window
- Lock cable M1, status
- Lock cable M2, status
- Lock cable M3, status
- Door open warning lamp, status (does not apply to all vehicles)
- Defroster, status
- Door mirror lamp, status
- Outside temperature, value

NOTE: The outside temperature can only be read off from the control module on the right-hand side of the car.

- Power supply, value
- Signal supply, value
- Door mirror position X axis, value (does not apply to all vehicles)
- Door mirror position Y axis, value (does not apply to all vehicles).