Configuration Fault

Configuration fault

Downloading software
- Save a bookmark and cancel the fault-tracing. Then go to the software manager and download the correct software. Then resume the fault-tracing.

Note! After downloading the software, the Suspension Module (SUM) must be calibrated according to VIDA vehicle communication.






Continue - Reading off diagnostic trouble codes (DTCs)

-------------------------------------------------

Reading off diagnostic trouble codes (DTCs)




- Ignition off
- Wait approximately 15 seconds
- Ignition on
- Read off diagnostic trouble codes (DTCs).









Is diagnostic trouble code (DTC) SUM-0261 stored?

Yes - Fault-tracing information

No - Fault Found

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

Attempt New Test - Downloading software

FAULT-TRACING FAILED - FAULT-TRACING FAILED

-------------------------------------------------