Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




The Suspension Module (SUM) must be calibrated after repair or after new software is downloaded. Diagnostic trouble code (DTC) SUM-0223 is stored if a value is incorrect when calibrating the solenoids on the shock absorbers.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Note! The test is carried out every other operating cycle. The Suspension module (SUM) defines an operating cycle as ignition on and ignition off.

Substitute value
- None.

Hint: For information about abbreviations, see Suspension system, abbreviations Description and Operation.

Possible source
- Open-circuit in the cable for the shock absorber
- Fault in one of the solenoids
- Internal fault in the Suspension Module (SUM).

Fault symptom[s]
- General warning lamp lit
- Message in the display.