Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Diagnostic trouble code (DTC) SUM-0208 is stored if the suspension module (SUM) registers that the internal communication for the storage of data to the control module EEPROM memory is not correctly completed.

Note! The test is carried out every other operating cycle. The Suspension module (SUM) defines an operating cycle as ignition on and ignition off.

Substitute value
- None.

Hint: For information about abbreviations, see Suspension system, abbreviations Description and Operation.

Possible source
- Low battery voltage
- Fault in the software.

Fault symptom[s]
- General warning lamp lit
- Message in the display.