Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




The Suspension Module (SUM) receives information about the vertical movement of the front wheels from the acceleration sensors on the shock absorbers. Diagnostic trouble code (DTC) SUM-0012 or SUM-0022 is stored if the control module registers that the signal from one of the acceleration sensors is too high when the ignition is switched on.
- SUM-0012: Left front acceleration sensor
- SUM-0022: Right front acceleration sensor.

Note! The test is carried out every other operating cycle. The Suspension module (SUM) defines an operating cycle as ignition on and ignition off.

Substitute value
- Four-C control is switched off.

Hint: For information about abbreviations for the suspension system, see Suspension system, abbreviations Description and Operation.

Possible source
- Short-circuit to supply voltage in the signal cable
- Defective acceleration sensor.

Fault symptom[s]
- General warning lamp lit
- Message in the display
- Four-C does not work.